TCP/IP settings for Win XP/ 2000
- Double click on Local Area Connection and select Properties.
| |
2. Select ‘Internet Protocol(TCP/IP)’ and click on Properties.
3. Select ‘Use following IP address’and enter IP address 192.168.1.3(other than 1), subnet mask 255.255.255.0, Default gatway 192.168.1.1, and enter the DNS server IP addresses for Primary DNS as 61.1.96.69 and Secondary DNS as 61.1.96.71
4.Click OK.
Multi user configuration(Router mode configuration) for different Types of CPE-ADSL modems are given bellow.
With this configuration, the third party pppoe software installation is not required on customer PC. Only TCP/IP address setting ( As per above procedure) is required.Steps to put CPE in Router mode for Multi-user configuration:
MT841 MODEM
Go to Network connections, right click on LAN icon then click on properties.
Select protocol TCP/IP and click on properties then select Use the following IP
Give PC ip address as 192.168.1.3{other than 1}
Mask 255.255.255.0
Gateway is 192.168.1.1
Now click on internet explorer{browser} and give url as http://192.168.1.1 and press enter
Logon window will be displayed.
Then type
user name: admin
Password : admin
You will enter into the web manager
Click on Basic available on the left side of the window,.
Select the following
WAN Type : PPPoe
VPI/VCI : 0/35
Default route : Enabled
Type your dataone UserId & Password given by the ISP
Use DNS : Enabled
Then click on apply
Then Save & Reboot
Now Multiuser connection (Router mode) is ready to use.
Various settings for different modems - If your modem is not listed here, you can use the one here which matches your modem closely. Click open and Zoom in the images to view clearly.
No comments:
Post a Comment